MSP-SB 225 Ton Die Spotting Tryout Press

Item: Die Spotting Tryout Press
Series: MSP-SB

Description

STANDARD FEATURES

  • Solid, robust construction
  • Color HMI with die/job memory
  • Linear position sensor
  • Interlocked, hinged guards on 3 sides
  • Safety ratchet bar

 

STANDARD CONTROL FEATURES

  • PLC and HMI color touch screen with graphics and die setup memory.

 

Options

  • Allen Bradley PLC and HMI Control System
  • Seimans PLC and HMI Control Systems
  • Omron PLC and HMI Control Systmes

 

The MSP series die spotting press is suitable for final assembly, grinding and repair work of molds/dies for various processes including plastic injection mold, punching die, transfer mold, metal mold, forging mold, die-casting dies, glass mold, rubber and plastic mold, metallurgy die and is specially and ideally designed for the mold/die manufacturing industry. In addition, it the MSP series is well suited for large area sheet cold press molding in the auto industry, motorcycle industry and hardware industry.

This spotting press is composed of an upper worktable that can move up and down, and also flip, and a lower worktable that moves horizontally. The lower worktable is pushed to the auxiliary worktable, while the upper worktable can move up and down and also flip 180°. Finally, the upper and lower dies are faced up on the worktable for easy observation and grinding conducted by the operator.

The MSP series die spotting press comes in two configurations.  The standard configuration is MSP with a front bolster.  The second configuration is MSP-SB with a side bolster (SB).  Each configuration comes in a variety of sizes. This manual applies to both configurations.

The MSP series die spotting press has been developed using 3D modeling of the body assembly, motion simulation and optimization of key parts. In addition, the latest simulation technology has been used to optimize kinematics and dynamic characteristics to ensure smooth open/close operation and balanced mold/die clamping force. The permanent seat and shifting seat use a box-type structure, and undergo finite element stress analysis and strain analysis to ensure high parallelism between the two platens. The whole hydraulic system features good dynamic performance, smooth switching and no-leakage to comply with environmental protection concepts. The control portion is designed with a state of art PLC and HMI which features a large color LCD.  This spotting press designed with oil temperature monitoring and a comprehensive alarm system with simple fault detection capabilities for easy troubleshooting and maintenance. This spotting press is provided with three safety protection units, including mechanical, hydraulic and electrical units.

Please carefully read and understand this instruction manual before using this machine. For more information about technology or operation, please feel free to contact us.

225 Ton Die Spotting Tryout Press MSP-SB-225

MSP-SB-225ImperialMetric
Clamping Force225 tons200 tonnes
Opening Force50.7 tons46 tonnes
Overturn Force11 tons10 tonnes
Ejection Force7.7 tons7 tonnes
Working Speed2.7 inch/sec0 -70 mm/sec
Clamping Speed1.2 inch/sec0 -30 mm/sec
Die Dimensions70 x 59 inch1800 x 1500 mm
Opening Stroke of Upper and Lower Platen74.8 inch1900 mm
Minimum Distance Between Two Platens 7.9 inch200 mm
Shift Out Stroke of Die84.8 inch2180 mm
Ejection Stroke9.8 inch250 mm
Overturn Angle180°180°
Max Weight of Die22 tons20 tonnes
External Dimensions
(L x W x H)
197 x 170 x 220 inch5000 x 4300 x 5600 mm
Machine Weight33 tons30 tonnes
Motor Capacity30 HP22 kW

Reviews

There are no reviews yet.

Be the first to review “MSP-SB 225 Ton Die Spotting Tryout Press”