- Solid, robust construction
- Color HMI with die/job memory
- Linear position sensor
- Interlocked, hinged guards on 3 sides
- Safety ratchet bar
STANDARD CONTROL FEATURES
- PLC and HMI color touch screen with graphics and die setup memory.
- Allen Bradley PLC and HMI Control System
- Siemens PLC and HMI Control Systems
- Omron PLC and HMI Control Systmes
The MSP series die spotting press is suitable for final assembly, grinding and repair work of molds/dies for various processes including plastic injection mold, punching die, transfer mold, metal mold, forging mold, die-casting dies, glass mold, rubber and plastic mold, metallurgy die and is specially and ideally designed for the mold/die manufacturing industry. In addition, it the MSP series is well suited for large area sheet cold press molding in the auto industry, motorcycle industry and hardware industry.
This spotting press is composed of an upper worktable that can move up and down, and also flip, and a lower worktable that moves horizontally. The lower worktable is pushed to the auxiliary worktable, while the upper worktable can move up and down and also flip 180°. Finally, the upper and lower dies are faced up on the worktable for easy observation and grinding conducted by the operator.
The MSP series die spotting press comes in two configurations. The standard configuration is MSP with a front bolster. The second configuration is MSP-SB with a side bolster (SB). Each configuration comes in a variety of sizes. This manual applies to both configurations.
The MSP series die spotting press has been developed using 3D modeling of the body assembly, motion simulation and optimization of key parts. In addition, the latest simulation technology has been used to optimize kinematics and dynamic characteristics to ensure smooth open/close operation and balanced mold/die clamping force. The permanent seat and shifting seat use a box-type structure, and undergo finite element stress analysis and strain analysis to ensure high parallelism between the two platens. The whole hydraulic system features good dynamic performance, smooth switching and no-leakage to comply with environmental protection concepts. The control portion is designed with a state of art PLC and HMI which features a large color LCD. This spotting press designed with oil temperature monitoring and a comprehensive alarm system with simple fault detection capabilities for easy troubleshooting and maintenance. This spotting press is provided with three safety protection units, including mechanical, hydraulic and electrical units.
Please carefully read and understand this instruction manual before using this machine. For more information about technology or operation, please feel free to contact us.
335 Ton Die Spotting Tryout Press MSP-335
|Clamping Force||335 tons||300 tonnes|
|Opening Force||61.7 tons||56 tonnes|
|Overturn Force||19.8 tons||18 tonnes|
|Ejection Force||11 tons||10 tonnes|
|Working Speed||2.7 inch/sec||0 -70 mm/sec|
|Clamping Speed||1.2 inch/sec||0 -30 mm/sec|
|Die Dimensions||86 x 70 inch||2200 x 1800 mm|
|Opening Stroke of Upper and Lower Platen||87 inch||2230 mm|
|Minimum Distance Between Two Platens||5 inch||130 mm|
|Shift Out Stroke of Die||169 inch||4300 mm|
|Ejection Stroke||7 inch||250 mm|
|Max Weight of Die||39.5 tons||36 tonnes|
|External Dimensions |
(L x W x H)
|291 x 134 x 272 inch||7400 x 3400 x 6900 mm|
|Machine Weight||55 tons||50 tonnes|
|Motor Capacity||35 HP||26 kW|