MSP-SB 75 Ton Die Spotting Tryout Press

Item: Die Spotting Tryout Press
Series: MSP-SB



  • Solid, robust construction
  • Color HMI with die/job memory
  • Linear position sensor
  • Interlocked, hinged guards on 3 sides
  • Safety ratchet bar



  • PLC and HMI color touch screen with graphics and die setup memory.



  • Allen Bradley PLC and HMI Control System
  • Seimans PLC and HMI Control Systems
  • Omron PLC and HMI Control Systmes


The MSP series die spotting press is suitable for final assembly, grinding and repair work of molds/dies for various processes including plastic injection mold, punching die, transfer mold, metal mold, forging mold, die-casting dies, glass mold, rubber and plastic mold, metallurgy die and is specially and ideally designed for the mold/die manufacturing industry. In addition, it the MSP series is well suited for large area sheet cold press molding in the auto industry, motorcycle industry and hardware industry.

This spotting press is composed of an upper worktable that can move up and down, and also flip, and a lower worktable that moves horizontally. The lower worktable is pushed to the auxiliary worktable, while the upper worktable can move up and down and also flip 180°. Finally, the upper and lower dies are faced up on the worktable for easy observation and grinding conducted by the operator.

The MSP series die spotting press comes in two configurations.  The standard configuration is MSP with a front bolster.  The second configuration is MSP-SB with a side bolster (SB).  Each configuration comes in a variety of sizes. This manual applies to both configurations.

The MSP series die spotting press has been developed using 3D modeling of the body assembly, motion simulation and optimization of key parts. In addition, the latest simulation technology has been used to optimize kinematics and dynamic characteristics to ensure smooth open/close operation and balanced mold/die clamping force. The permanent seat and shifting seat use a box-type structure, and undergo finite element stress analysis and strain analysis to ensure high parallelism between the two platens. The whole hydraulic system features good dynamic performance, smooth switching and no-leakage to comply with environmental protection concepts. The control portion is designed with a state of art PLC and HMI which features a large color LCD.  This spotting press designed with oil temperature monitoring and a comprehensive alarm system with simple fault detection capabilities for easy troubleshooting and maintenance. This spotting press is provided with three safety protection units, including mechanical, hydraulic and electrical units.

Please carefully read and understand this instruction manual before using this machine. For more information about technology or operation, please feel free to contact us.

75 Ton Die Spotting Tryout Press MSP-SB-75

Clamping Force75 tons70 tonnes
Opening Force24.2 tons22 tonnes
Overturn Force2.7 tons2.5 tonnes
Ejection Force3.3 tons3 tonnes
Working Speed2.7 inch/sec0 -70 mm/sec
Clamping Speed1.2 inch/sec0 -30 mm/sec
Die Dimensions39 x 31 inch1000 x 800 mm
Opening Stroke of Upper and Lower Platen39 inch1000 mm
Minimum Distance Between Two Platens 5.9 inch150 mm
Shift Out Stroke of Die47 inch1200 mm
Ejection Stroke8.6 inch220 mm
Overturn Angle180°180°
Max Weight of Die4.4 tons4 tonnes
External Dimensions
(L x W x H)
116 x 112 x 153 inch2950 x 2850 x 3800 mm
Machine Weight10 tons9 tonnes
Motor Capacity15 HP11 kW


There are no reviews yet.

Be the first to review “MSP-SB 75 Ton Die Spotting Tryout Press”